| Contact Us |
|
1-800-381-1997
|
| Pulsecom Representatives |
|
Integral Sales, Inc.
DC, DE MD, PA, VA
410-750-3553
Rep Com International, Inc.
AL, AK, AR, AZ, CA, CO, FL, GA, IA, ID, IL, KS, KY, LA, MN, MO, MS, MT, NC, ND, NE, NM, NV, OK, OR, SC, SD, TN, TX, UT, WA, WY
800-737-9992
Utility Sales Associates, Inc.
IL, IN, KS, MI, MO, OH, WI
800-253-6248
|
|
| Dear Reader,
Don't break the bank in order to optically extend DS1 services!
The realities of the current economy are forcing everyone to re-think deployment strategies. Not only does the equipment need to be low cost, but installation and maintenance need to be low cost as well.
Pulsecom has become synonymous with cost efficient access products for small and mid sized applications.
Why? Because Pulsecom DS1 extension products:
Extend services directly from SONET muxes or in a "book-ended" configuration
Operate indoors or in OSP cabinets
Use existing NMS, Network Management Systems
Incorporate "Smart Jack" functionality
Incorporate Lightning protection
Use standard mechanics, Smart Jack mountings
Require NO software
Operate on 24Vdc, 48Vdc, AC or Span Power
Utilize patented Optionless SONET for fast, easy turn-up
Too good to be true? Join the other Pulsecom customers who know the best solutions can also be the least expensive.
Learn more about Pulsecom's solutions:
|
|
Minimize First Costs
Utilize Existing Housings, Power and Management
The O3-12D1D is Pulsecom's self contained module used to extend up to 12 DS1s over a standard SONET OC3. With this self contained module, there is no software, no common cards and no proprietary shelf. Provisioning is accomplished with Pulsecom's Patented Optionless SONET.
Standard SONET interfaces allow the OC3 fiber to be terminated directly on a SONET mux, eliminating the need for any additional CO equipment.
The standard mechanics form factor of the O3-12D1D allows it to be installed in many NCTE and Smart Jack housings. Since they include integrated lightning protection, T1 Smart Jacks are no longer needed. The modules respond to the standard T1 loopback codes, as well as SONET TL-1 messages, so standard testing can still be used. And since they are environmentally hardened, the same module may be installed in the CO, OSP cabinet or customer premise.
Concerned about energy? The O3-12D1D uses up to 85% less power than HDSL and may be powered by 24Vdc, 48Vdc, 120VAC or span power.
Utilize Existing SONET muxes
The OBBF/OBBFR products breathe new life into existing DDM-2000 SONET multiplexers. The OBBF is installed in a low speed line card slot of the DDM-2000 and optically extends four DS1s to the OBBFR. The OBBF/OBBFR combination operates (and is provisioned) just like a standard BBF3 quad line card.
| |
|
Minimize Management Costs
Remote DS1 Management through SONET Data Communications Channel
The O3-12D1D module provides 1-12 DS1 extensions over a standard SONET OC3 transport. Not only does the O3-12D1D operate like an extension from a SONET mux, it can be managed in the same way. The SONET Data Communication Channel, DCC, allows communication from a centralized Network Operations Center or CO through your existing SONET muxes to the O3-12D1D with TL-1 support. Provisioning, maintenance, alarm reporting and operational statistics are available from almost any point in your network.
When using a DDM-2000, Pulsecom's OBBF line card is installed into one of the low speed line card slots and is managed just like a BBF3 type quad DS1 cards. |
| Upcoming Trade Shows
See us at:
Georgia Telephone Association
Vendor Showcase
Macon, GA
Feb. 17-18
with RepCom International
CalCom Showcase and Tech Expo
Sacramento, CA
Feb. 24-26
with RepCom International
Nebraska Tel Association Technology Day
Grand Island, Nebraska
Feb. 25
with RepCom International
VTIA - TCI Conference
Williamsburg, VA
March 3-4
with Integral Sales
ITA Showcase 2009
Portland, OR
March 3-4
with RepCom International
NCTIA Technology Conference
Twin City Quarter, Winston-Salem, NC
March 4-5
with RepCom International
| |
|
For more information on the O3-12D1D, OBBF and OBBFR or any of Pulsecom's products, go to www.pulse.com.
Thank you for your interest. Please feel free to contact me directly at 703-471-2926 or any Pulsecom representative with questions or comments.
|
| |
